VOCATIONAL REHABILITATION | FUNCTIONAL ASSUMPTIONS
NOV 10 2026 | HM VOCATIONAL CONSULTING
Understanding how functional evidence and occupational information intersect in vocational evaluation.
In vocational evaluation, we often work with two different types of information: evidence describing an individual's functional abilities and information describing the demands of occupations.
Bringing these two sources together is a fundamental part of assessing vocational suitability. It can also be one of the more challenging aspects of the analysis, particularly when the available functional information lacks specificity.
Medical documentation may provide detailed information about diagnoses, symptoms, treatment and prognosis while offering relatively little about lifting capacity, positional tolerances, activity frequency or the ability to sustain work over a typical workday.
At the same time, occupational information sources such as the Occupational and Skills Information System (OaSIS) provide structured descriptions of occupational requirements.
The challenge lies in determining how much we can reasonably conclude when the information on either side of that comparison is incomplete.
When Functional Information Lacks Specificity
Consider an individual whose medical documentation identifies chronic low back pain and difficulty with prolonged standing.
The documentation may be extensive, but several questions remain unanswered.
What constitutes prolonged standing? Is the individual able to stand for 15 minutes, one hour or several hours? Can they alternate between sitting and standing? Does the difficulty increase with repeated activity? Are there restrictions on lifting, bending or carrying?
These distinctions can have a considerable influence on occupational suitability.
A general reference to difficulty with prolonged standing tells us that standing tolerance may be a concern. It does not necessarily establish a specific duration, frequency or level of restriction.
The same applies to lifting. A recommendation to avoid heavy lifting may be clinically meaningful, but without clarification, the precise weight and frequency parameters may remain uncertain.
This creates a challenge when comparing the individual's functional profile with occupations that have established physical demands.
There are two potential errors in this process. We may assign limitations that have not been established, excluding occupations that could otherwise warrant consideration. Alternatively, we may assume that an individual can meet occupational demands simply because a corresponding restriction has not been documented.
Neither conclusion necessarily follows from the available evidence.
Understanding What OaSIS Ratings Represent
OaSIS is a Canadian occupational information resource developed by Employment and Social Development Canada. It provides information about occupational characteristics, including abilities, skills, knowledge and work activities.
These characteristics can be useful in vocational evaluations, transferable skills analyses and occupational research.
However, interpreting an occupational rating requires an understanding of what that rating represents.
For example, an occupation may have a particular Static Strength rating. The numerical level provides a useful reference, but the rating alone does not explain every parameter involved in the occupational requirement.
This is where the Canadian Rating Guides (CRGs) become particularly valuable.
The CRGs provide definitions, rating indicators, level descriptions and occupational examples that help explain how OaSIS characteristics are rated.
Rather than relying solely on a numerical level, evaluators can examine the underlying descriptors to better understand the nature and degree of an occupational requirement.
A Closer Look at the Abilities CRG
The Canadian Rating Guide for Abilities includes several physical ability descriptors relevant to vocational analysis, including Static Strength, Trunk Strength, Body Flexibility and Stamina.
Each descriptor addresses a particular ability, with rating levels informed by defined indicators.
Consider Static Strength. The Abilities CRG defines this ability in relation to exerting muscular force to lift, push, pull, carry or transfer objects. Its rating framework considers weight in relation to frequency, along with typical energy requirements.
For example, the guide identifies the following parameters for Static Strength:
Rating Occasional lifting parameter
Level 1 Up to 10 lb (4.5 kg)
Level 2 10–20 lb (4.5–9 kg)
Level 3 20–50 lb (9–23 kg)
In the CRG, occasional refers to 0–33% of the workday.
These examples illustrate why understanding the rating criteria matters. The full Static Strength framework also considers frequent and constant demands, as well as energy requirements.
Now consider an individual whose medical documentation recommends avoiding heavy lifting but provides no specific weight restriction.
Can we confidently determine whether that individual meets a Level 2 or Level 3 Static Strength requirement? Not necessarily.
The occupational information may describe the expected demands, but the functional documentation may not provide enough specificity to establish whether those demands fall within the individual's abilities.
The CRG helps us understand the occupational side of the comparison. It does not establish the individual's lifting capacity.
Beyond Lifting: Position, Duration and Endurance
Lifting is only one example. The Abilities CRG also includes descriptors that consider duration and other aspects of physical performance.
For instance:
Trunk Strength considers the ability to use the abdominal and lower back muscles to support the body repeatedly or continuously, with indicators addressing muscular strength and task duration.
Body Flexibility considers bending, stretching, twisting and reaching, including the difficulty of required positions and the duration of tasks performed in those positions.
Stamina considers the intensity and duration of physically demanding activities.
These descriptors provide a more detailed understanding of the abilities associated with occupational performance. They also demonstrate why functional evidence that identifies only a general difficulty may not be sufficient to establish compatibility with a particular occupational rating.
Importantly, not every positional or workday tolerance is directly represented by an Abilities rating. Occupational characteristics need to be interpreted according to their specific definitions, and additional occupational information may be necessary.
When Occupational Requirements and Functional Evidence Do Not Align
Consider a transferable skills analysis involving an individual with a history of physically demanding employment. Based on their education, work experience and transferable skills, several alternative occupations may be identified. The occupational research indicates that some of these occupations involve lower physical strength requirements than the individual's previous employment.
At first glance, they may appear to be reasonable alternatives. However, the medical documentation identifies reduced physical tolerance without specifying lifting limits, positional tolerances or the frequency and duration of activities the individual can sustain. The occupational information provides a basis for identifying potentially suitable work, but there may still be insufficient information to determine whether the individual can meet all relevant functional demands.
This doesn’t necessarily prevent the evaluator from identifying occupations consistent with the individual's vocational profile. It does, however, affect the degree of certainty that can reasonably be attached to conclusions about functional suitability.
An occupation may be suitable from an educational, experiential and skills perspective while its functional suitability remains uncertain. Recognizing that distinction allows the analysis to proceed without treating missing information as either evidence of capacity or evidence of restriction.
The Value of the Canadian Rating Guides
One of the benefits of using the CRGs alongside OaSIS is the additional context they provide for interpreting occupational characteristics. The Abilities CRG can help clarify what a particular rating represents, which indicators contribute to that rating and what types of occupational tasks may be associated with different levels.
This can also help identify where the available functional evidence may require further clarification. For example, when occupational requirements involve specific weight and frequency parameters, it becomes easier to recognize the significance of a medical restriction that refers only to heavy lifting.
Similarly, when an occupational ability descriptor incorporates task duration, a general statement about reduced tolerance may leave an important part of the comparison unresolved.
The CRGs do not replace clinical evidence, functional assessment or individualized vocational judgment. Nor do they establish the exact demands of every position within an occupational classification. They provide a more detailed framework for understanding occupational ratings and making informed comparisons.
Bringing the Information Together
Vocational evaluation involves integrating information from multiple sources, each contributing something different to the analysis. Medical and functional evidence helps us understand an individual's abilities, reported difficulties and established restrictions. Occupational information helps us understand the requirements associated with potential employment options.
The quality of the comparison depends, in part, on how well those two sources can be aligned. Where the information is sufficiently detailed, it may support more specific conclusions about occupational suitability. Where important functional parameters remain unknown, the analysis may need to acknowledge those uncertainties or identify the need for further clarification.
For me, this is one of the more interesting aspects of vocational evaluation methodology. The challenge is not simply identifying occupations that appear to match an individual's vocational background. It is understanding what the evidence supports when considering whether those occupations are realistically suitable.
The Canadian Rating Guides are a useful resource in that process, particularly when we look beyond the numerical ratings to understand the occupational requirements they represent.
References and Further Reading
Employment and Social Development Canada. Occupational and Skills Information System (OaSIS). Government of Canada.
Employment and Social Development Canada. (2024). Canadian Rating Guide for Abilities, Version 2.0, August 20, 2024.
Employment and Social Development Canada. National Occupational Classification (NOC) 2021.
Official resources:
National Occupational Classification: https://noc.esdc.gc.ca/
About HM Vocational Consulting
HM Vocational Consulting provides vocational rehabilitation, transferable skills analysis, employment and career planning, return-to-work planning, and professional practice development services across Canada.
Our approach emphasizes individualized vocational planning, evidence-informed practice and collaboration to identify and address employment barriers.
Heather Mallard, CVRP-TSA, ICVE, CCVE, RVP, Vocational Evaluator & Rehabilitation Professional | HM Vocational Consulting
About the Author Heather Mallard is a vocational evaluator and rehabilitation professional and the founder of HM Vocational Consulting. Her work focuses on vocational assessment, rehabilitation, return to work, and the relationship between work, identity and meaning.

